Kyocera Fax B - KM2030 - U Maintenance free download

File name Fax B - KM2030 - U Maintenance.pdf

3B1 Maintenance Description item No. U914 Switching between fax/copier modes Description Switches between fax and copier modes when the facsimile kit is installed to use the copier as a fax. Purpose To be set according to frequency of use: set to the more frequently used mode. Method Press the start key. The screen for selecting an item is displayed. Setting 1. Select the mode (copier or fax) to be given priority using the cursor up/down keys. 2. Press the start key. The value is set, and the screen for selecting a maintenance item No. is displayed. Completion To exit this maintenance item without changing the current setting, press the stop/clear key. The screen for selecting a maintenance item No. is displayed. U992 Checking or clearing the printer/fax count Description 1-3 Displays, clears or changes the print count of the printer or fax when the printer board or facsimile kit is installed. Purpose To check the condition of use of the printer or fax. Method Press the start key. The print count of the printer or fax is displayed. Setting 1. Select the count to be changed using the cursor up/down keys. 2. Enter a six-digit numerical value using the numeric keys. To clear both of the printer and fax counts, press the reset key. 3. Press the start key. The count is set. Completion Press the stop/clear key. The screen for selecting a maintenance item No. is displayed. 1-3-34 3B1 Maintenance Description item No. U894 Performing board test Description Performs tests on the SRAM, DRAM (image memory, bitmap memory) and optional memory on the fax control PCB. Purpose Used to check if reading and writing are performed correctly in respective installed memories. Start 1. Press the start key. The screen for selecting an item is displayed. 2. Select an item using the cursor up/down keys. Display Description BOARD MEMORY Performs tests on SRAM and DRAM. BOARD OP. MEM Performs tests on optional memory. Performing tests on SRAM and DRAM 1. Press the start key. The test is performed and the results displayed as follows.